|
1. First clean the back of the
plate, even if the plate is new. Vigorously
rub in a little scouring cream or powder.
Rinse clean and allow to dry.
2. Using the fingers mix a
little water into the glue on the DISC. Leave
for 5-10 minutes until the glue is tacky.
3. Apply the DISC to the
plate ensuring that the ring is in the correct
position for the plate design. Press
firmly and rub well to expel any air. Leave
overnight to dry.
4. Before hanging test
strength of adhesion by pulling firmly on the ring.
To remove a DISC - soak the plate
in warm water. The DISC is designed so that it
can be used and removed safely without spoiling the
plate or its markings.
The DISC Plate Hanger also has excellent
adhesion to wood, hardboard and blockboard - ideal
for hanging small pictures etc.
|
